-
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
Ball Valves
- Type: Ball valve (quarter-turn shut-off valve)
- Load: Handles internal fluid pressure; not designed for mechanical load-bearing
- Cage: Not applicable (solid ball with seats instead of cage structure)
- Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
- Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
- Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
- Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear
₨ 999.00Ball Valves
₨ 999.00 -
Centrifugal Pumps
- Type: Rotodynamic pump (centrifugal type)
- Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
- Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
- Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
- Construction: Casing, impeller, shaft, seals, bearings, and drive motor
- Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
- Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency
₨ 19,999.00Centrifugal Pumps
₨ 19,999.00 -
-
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
Flange Mounted Bearing
Type: Flange Mounted Bearing Unit (2-Bolt)
Load: Primarily radial, moderate loadsCage: Steel or polymer cage (insert bearing)
Performance: Smooth operation with self-alignment capability
Construction: Cast housing + insert bearing with seals
Use Cases: Conveyors, machinery frames, rotating shafts
Note: Ideal for applications requiring easy mounting and alignment tolerance₨ 449.99Flange Mounted Bearing
₨ 449.99 -
-
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
-
Tapered Roller Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 415.00Tapered Roller Bearing
₨ 415.00 -
-
Tapered Roller Thrust Bearing
-
Type: Tapered roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (varies by series)
-
Performance: High stiffness, strong shock-load handling, reliable at low–moderate speeds
-
Construction: Thrust washers + tapered rollers + cage (often separable for easy installation)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs precise alignment and rigid mounting faces; use a separate radial bearing for side loads.
₨ 400.00Tapered Roller Thrust Bearing
₨ 400.00 -
-
Thrust Ball Bearing
-
Type: Thrust ball bearing (brass cage)
-
Load: Designed for axial/thrust loads (along the shaft)
-
Cage: Brass retainer for durability and stable ball spacing
-
Performance: Low friction, smooth rotation, good wear resistance
-
Construction: Steel races + precision steel balls, serviceable assembly
-
Use cases: Vertical shafts, turntables, lead screws, fixtures, gearboxes (axial support)
-
Note: Limited radial load capacity—use a radial bearing if side load is significant
₨ 450.00Thrust Ball Bearing
₨ 450.00 -
NSK is a globally recognized manufacturer of precision motion and control components, best known for high-quality bearings, linear guides, and automotive/industrial solutions. With decades of engineering expertise and strict quality control, NSK products are trusted in demanding applications where smooth operation, reliability, and long service life matter—such as motors, gearboxes, pumps, conveyors, machine tools, and automotive systems.
NSK bearings are valued for their consistent performance, accurate tolerances, and wide range of options including deep groove ball bearings, angular contact bearings, tapered roller bearings, cylindrical/needle bearings, thrust bearings, and mounted units. Whether you’re replacing a standard bearing or specifying components for industrial machinery, NSK offers dependable solutions engineered for efficiency and durability.
Why choose NSK
Proven performance and long service life
Precision manufacturing and consistent tolerances
Broad product range for industrial and automotive use
Trusted worldwide for quality and reliability