-
- Type: Quick-connect coupling (Cam and Groove, Camlock)
- Load: Designed for fluid pressure loads, not mechanical or structural loads
- Cage: Not applicable (no internal bearing cage; uses gasket sealing)
- Performance: Fast operation, reliable sealing, moderate pressure handling depending on material and size
- Construction: Male adapter (groove) and female coupler (cam arms) with gasket seal, typically machined or molded body
- Use cases: Hose connections for fluid transfer, tankers, pumps, industrial pipelines, agricultural systems
- Note: Ensure proper locking of cam arms before operation; not suitable for high-pressure compressed air or steam unless specifically rated
₨ 1,380.00
-
- Type: Air-Operated Double Diaphragm (AODD) pump
- Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
- Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
- Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
- Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
- Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
- Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00
-
- Type: Reciprocating piston pump (positive displacement)
- Load: Handles high-pressure loads with steady flow output
- Cage: Not typically cage-based; uses piston, seals, and valve assemblies
- Performance: High efficiency, accurate flow control, capable of very high pressures
- Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
- Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
- Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
₨ 34,000.00
-
- Type: Submersible pump (water/sewage/deep well types)
- Load: Handles hydraulic load based on fluid head and flow demand
- Cage: Not applicable (sealed motor and impeller assembly)
- Performance: High efficiency, consistent flow, self-priming due to submerged operation
- Construction: Sealed motor housing, impeller, shaft, mechanical seals, and waterproof cable
- Use cases: Borewells, drainage pits, sewage systems, irrigation, construction sites
- Note: Must remain submerged during operation for cooling; running dry can damage the pump
₨ 35,000.00
