Type: Flexible air hose for compressed air systems
Load: Internal air pressure (PSI rating); minimal external load handling
Cage: Not applicable (no internal cage; reinforced layers instead)
Performance: Consistent airflow, flexible handling, good pressure resistance
Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00
Type: Elbow fitting (45° / 90°)
Load: Handles internal fluid pressure; minimal mechanical load-bearing role
Cage: Not applicable (no rolling elements)
Performance: Reliable flow direction change with minimal leakage when properly installed
Construction: Solid angled body with threaded, compression, or push-fit ends; made from metal or polymer
Use cases: Pipe routing, tight corner connections, hydraulic/pneumatic systems, plumbing networks
Note: Ensure proper sealing, correct torque during installation, and compatibility with pressure and fluid type to avoid leaks or failures
₨ 999.00
Type: Pipe connection component (weld neck, slip-on, blind, threaded, lap joint)
Load: Handles internal pressure, bolt clamping force, and external piping loads
Cage: Not applicable (non-bearing component)
Performance: Reliable sealing, high strength, stable under pressure and temperature variations
Construction: Typically forged or cast metal with machined sealing faces and bolt holes
Use cases: Pipe system connections, equipment mounting, flow control assemblies
Note: Ensure correct standard, gasket, and torqueing method to avoid leakage or failure
₨ 1,000.00
Type: Fuel and oil resistant flexible hose
Load: Handles internal fluid pressure and external bending stress
Cage: Not applicable, no internal cage structure
Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00
Type: Flexible hydraulic hose (reinforced, high-pressure)
Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
Cage: Not applicable (uses reinforcement layers instead of cage structure)
Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00
Type: Reciprocating piston pump (positive displacement)
Load: Handles high-pressure loads with steady flow output
Cage: Not typically cage-based; uses piston, seals, and valve assemblies
Performance: High efficiency, accurate flow control, capable of very high pressures
Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
₨ 34,000.00
Type: PTFE (Teflon) tubing
Load: Designed for fluid and gas transfer under pressure; not load-bearing
Cage: Not applicable (no rolling elements)
Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00
Type: Flexible PVC tubing (clear or reinforced variants available)
Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
Cage: Not applicable (non-bearing product)
Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00
Type: Submersible pump (water/sewage/deep well types)
Load: Handles hydraulic load based on fluid head and flow demand
Cage: Not applicable (sealed motor and impeller assembly)
Performance: High efficiency, consistent flow, self-priming due to submerged operation
Construction: Sealed motor housing, impeller, shaft, mechanical seals, and waterproof cable
Use cases: Borewells, drainage pits, sewage systems, irrigation, construction sites
Note: Must remain submerged during operation for cooling; running dry can damage the pump
₨ 35,000.00
Type: Tee fitting (equal or reducing type)
Load: Handles internal fluid pressure; no mechanical load-bearing function
Cage: Not applicable (no rolling elements or retainers)
Performance: Reliable flow distribution with minimal pressure drop when properly sized
Construction: Solid T-shaped body with three ports; available in metal or high-strength polymer
Use cases: Flow splitting, merging lines, pressure distribution in hydraulic/pneumatic systems
Note: Ensure correct sizing and sealing method; mismatched threads or poor installation can lead to leakage or system inefficiency
₨ 999.00
Type: Threaded pipe fitting (nipple)
Load: Handles internal fluid pressure; no mechanical load-bearing role
Cage: Not applicable (solid fitting, no moving parts)
Performance: Reliable sealing and connection when properly installed
Construction: Solid cylindrical piece with external threads on both ends (full or partial threading)
Use cases: Pipe extension, joining fittings, adapting system layouts, repairs
Note: Always match thread standards and use proper sealing methods to prevent leaks
₨ 1,380.00
