Gloxco Archives - Brickonix

Type: Quarter-turn rotary valve (Butterfly type)
Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
Cage: Typically no cage; uses a central shaft and disc mechanism
Performance: Fast operation, moderate flow control accuracy, low resistance in open position
Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life

Type: Quick-connect coupling (Cam and Groove, Camlock)
Load: Designed for fluid pressure loads, not mechanical or structural loads
Cage: Not applicable (no internal bearing cage; uses gasket sealing)
Performance: Fast operation, reliable sealing, moderate pressure handling depending on material and size
Construction: Male adapter (groove) and female coupler (cam arms) with gasket seal, typically machined or molded body
Use cases: Hose connections for fluid transfer, tankers, pumps, industrial pipelines, agricultural systems
Note: Ensure proper locking of cam arms before operation; not suitable for high-pressure compressed air or steam unless specifically rated

Type: Check valve (non-return valve)
Load: Handles fluid pressure loads in one direction; blocks reverse pressure
Cage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)
Performance: Quick response, low backflow leakage, stable operation under varying pressures
Construction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged ends
Use cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setups
Note: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions

Type: Gear pump (external or internal gear type)
Load: Handles hydraulic pressure loads; designed for steady fluid displacement
Cage: No cage; uses meshing gears supported by bearings/bushings
Performance: Steady flow, moderate pressure capability, efficient with viscous fluids
Construction: Housing + driving and driven gears + shafts + seals; close-clearance design
Use cases: Hydraulics, lubrication, fuel transfer, oil circulation, industrial fluid systems
Note: Requires clean fluid and proper lubrication; avoid dry running to prevent damage

Type: Globe valve with non-return (check) function
Load: Handles fluid pressure loads; designed for moderate to high-pressure systems
Cage: Internal guide or seat structure for flow control and sealing (varies by design)
Performance: Precise flow control with reliable backflow prevention and tight sealing
Construction: Valve body, seat, disc, stem, and check mechanism integrated into one unit
Use cases: Flow regulation and backflow prevention in pipelines, pump systems, and industrial processes
Note: Install in correct flow direction; not ideal for applications requiring full, unrestricted flow due to pressure drop characteristics

Type: Reciprocating piston pump (positive displacement)
Load: Handles high-pressure loads with steady flow output
Cage: Not typically cage-based; uses piston, seals, and valve assemblies
Performance: High efficiency, accurate flow control, capable of very high pressures
Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration

Electronics and Mechanical Components Store