• Butterfly Valves

    • Type: Quarter-turn rotary valve (Butterfly type)
    • Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
    • Cage: Typically no cage; uses a central shaft and disc mechanism
    • Performance: Fast operation, moderate flow control accuracy, low resistance in open position
    • Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
    • Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
    • Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life

    Butterfly Valves

     999.00
  • Check Valves (Non-Return Valves)

    • Type: Check valve (non-return valve)
    • Load: Handles fluid pressure loads in one direction; blocks reverse pressure
    • Cage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)
    • Performance: Quick response, low backflow leakage, stable operation under varying pressures
    • Construction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged ends
    • Use cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setups
    • Note: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
  • Diaphragm Pumps (AODD)

    • Type: Air-Operated Double Diaphragm (AODD) pump
    • Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
    • Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
    • Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
    • Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
    • Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
    • Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection

    Diaphragm Pumps (AODD)

     25,000.00
  • Gear Pumps

    • Type: Gear pump (external or internal gear type)
    • Load: Handles hydraulic pressure loads; designed for steady fluid displacement
    • Cage: No cage; uses meshing gears supported by bearings/bushings
    • Performance: Steady flow, moderate pressure capability, efficient with viscous fluids
    • Construction: Housing + driving and driven gears + shafts + seals; close-clearance design
    • Use cases: Hydraulics, lubrication, fuel transfer, oil circulation, industrial fluid systems
    • Note: Requires clean fluid and proper lubrication; avoid dry running to prevent damage

    Gear Pumps

     12,000.00
  • Globe Valves

    • Type: Globe valve with non-return (check) function
    • Load: Handles fluid pressure loads; designed for moderate to high-pressure systems
    • Cage: Internal guide or seat structure for flow control and sealing (varies by design)
    • Performance: Precise flow control with reliable backflow prevention and tight sealing
    • Construction: Valve body, seat, disc, stem, and check mechanism integrated into one unit
    • Use cases: Flow regulation and backflow prevention in pipelines, pump systems, and industrial processes
    • Note: Install in correct flow direction; not ideal for applications requiring full, unrestricted flow due to pressure drop characteristics

    Globe Valves

     999.00
  • Industrial Metal Tool Box

    Type: Metal hand-carry toolbox
    Material: Steel body
    Storage: Main compartment with internal tray
    Use cases: Mechanical tools, sockets, spanners, repair tools
    Durability: Better impact and load resistance than plastic boxes
    Note: Heavier but stronger than plastic toolboxes

  • Piston (Reciprocating) Pumps

    • Type: Reciprocating piston pump (positive displacement)
    • Load: Handles high-pressure loads with steady flow output
    • Cage: Not typically cage-based; uses piston, seals, and valve assemblies
    • Performance: High efficiency, accurate flow control, capable of very high pressures
    • Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
    • Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
    • Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
  • Steel Closed-Head Drum – 55 Gallons

    Type: Closed-head steel drum
    Capacity: 55 gallon / approx. 208 liter
    Material: Steel
    Feature: Bung openings for filling and dispensing
    Use cases: Oils, lubricants, industrial fluids, compatible chemicals
    Note: Not ideal for corrosive liquids unless lined/rated

Main Menu