-
Air Compressor Hose
- Type: Flexible air hose for compressed air systems
- Load: Internal air pressure (PSI rating); minimal external load handling
- Cage: Not applicable (no internal cage; reinforced layers instead)
- Performance: Consistent airflow, flexible handling, good pressure resistance
- Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
- Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
- Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00Air Compressor Hose
₨ 1,380.00 -
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
Fuel and Oil Hoses
- Type: Fuel and oil resistant flexible hose
- Load: Handles internal fluid pressure and external bending stress
- Cage: Not applicable, no internal cage structure
- Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
- Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
- Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
- Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00Fuel and Oil Hoses
₨ 999.00 -
Hydraulic Hoses
- Type: Flexible hydraulic hose (reinforced, high-pressure)
- Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
- Cage: Not applicable (uses reinforcement layers instead of cage structure)
- Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
- Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
- Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
- Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00Hydraulic Hoses
₨ 1,000.00 -
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
O-Ring Kits
- Type: O-ring kit (PVC, assorted sizes)
- Load: Suitable for low to moderate pressure sealing; not for high-load dynamic sealing
- Cage: Not applicable (solid elastomer ring design)
- Performance: Reliable sealing for basic applications; moderate flexibility and chemical resistance
- Construction: Solid PVC rings molded in various standard sizes, stored in organized kit box
- Use cases: Plumbing repairs, air line sealing, general maintenance, light industrial use
- Note: Avoid high temperatures and aggressive chemicals; ensure proper sizing and groove fit for effective sealing
₨ 5,000.00O-Ring Kits
₨ 5,000.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
PTFE (Teflon) Tubing
- Type: PTFE (Teflon) tubing
- Load: Designed for fluid and gas transfer under pressure; not load-bearing
- Cage: Not applicable (no rolling elements)
- Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
- Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
- Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
- Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00PTFE (Teflon) Tubing
₨ 1,000.00 -
PVC Tubing (Polyvinyl Chloride)
- Type: Flexible PVC tubing (clear or reinforced variants available)
- Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
- Cage: Not applicable (non-bearing product)
- Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
- Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
- Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
- Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00PVC Tubing (Polyvinyl Chloride)
₨ 999.00 -
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
-
Tapered Roller Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 415.00Tapered Roller Bearing
₨ 415.00 -
-
Tapered Roller Thrust Bearing
-
Type: Tapered roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (varies by series)
-
Performance: High stiffness, strong shock-load handling, reliable at low–moderate speeds
-
Construction: Thrust washers + tapered rollers + cage (often separable for easy installation)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs precise alignment and rigid mounting faces; use a separate radial bearing for side loads.
₨ 400.00Tapered Roller Thrust Bearing
₨ 400.00 -
-
Thrust Ball Bearing
-
Type: Thrust ball bearing (brass cage)
-
Load: Designed for axial/thrust loads (along the shaft)
-
Cage: Brass retainer for durability and stable ball spacing
-
Performance: Low friction, smooth rotation, good wear resistance
-
Construction: Steel races + precision steel balls, serviceable assembly
-
Use cases: Vertical shafts, turntables, lead screws, fixtures, gearboxes (axial support)
-
Note: Limited radial load capacity—use a radial bearing if side load is significant
₨ 450.00Thrust Ball Bearing
₨ 450.00 -
SKF is one of the world’s most trusted names in bearings and rotating equipment, known for precision engineering, reliability, and long service life in demanding industrial environments. SKF products are widely used across motors, gearboxes, pumps, conveyors, machine tools, automotive systems, and heavy machinery, where smooth operation and durability are critical.
SKF offers a broad range of bearing solutions including deep groove ball bearings, angular contact bearings, tapered roller bearings, spherical and cylindrical roller bearings, needle bearings, thrust bearings, and mounted bearing units—along with seals, lubrication, and maintenance accessories. From everyday replacements to high-performance applications, SKF components are built to deliver consistent performance, reduced downtime, and dependable operation.