-
17-Inch Plastic Tool Box
Type: Plastic portable toolbox
Model: TPBX0172 class
Size: 17-inch
Material: Plastic body with latch closure
Use cases: Maintenance tools, fasteners, electrical accessories
Note: Good budget-friendly professional toolbox.₨ 5,200.0017-Inch Plastic Tool Box
₨ 5,200.00 -
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
₨ 143,505.00NVIDIA Jetson Orin Nano Developer Kit
₨ 143,505.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
-
Tapered Roller Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 415.00Tapered Roller Bearing
₨ 415.00 -
-
Tapered Roller Thrust Bearing
-
Type: Tapered roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (varies by series)
-
Performance: High stiffness, strong shock-load handling, reliable at low–moderate speeds
-
Construction: Thrust washers + tapered rollers + cage (often separable for easy installation)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs precise alignment and rigid mounting faces; use a separate radial bearing for side loads.
₨ 400.00Tapered Roller Thrust Bearing
₨ 400.00 -
-
Thrust Ball Bearing
-
Type: Thrust ball bearing (brass cage)
-
Load: Designed for axial/thrust loads (along the shaft)
-
Cage: Brass retainer for durability and stable ball spacing
-
Performance: Low friction, smooth rotation, good wear resistance
-
Construction: Steel races + precision steel balls, serviceable assembly
-
Use cases: Vertical shafts, turntables, lead screws, fixtures, gearboxes (axial support)
-
Note: Limited radial load capacity—use a radial bearing if side load is significant
₨ 450.00Thrust Ball Bearing
₨ 450.00 -
