-
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
Butterfly Valves
- Type: Quarter-turn rotary valve (Butterfly type)
- Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
- Cage: Typically no cage; uses a central shaft and disc mechanism
- Performance: Fast operation, moderate flow control accuracy, low resistance in open position
- Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
- Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
- Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life
₨ 999.00Butterfly Valves
₨ 999.00 -
-
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
Elbow Fittings
- Type: Elbow fitting (45° / 90°)
- Load: Handles internal fluid pressure; minimal mechanical load-bearing role
- Cage: Not applicable (no rolling elements)
- Performance: Reliable flow direction change with minimal leakage when properly installed
- Construction: Solid angled body with threaded, compression, or push-fit ends; made from metal or polymer
- Use cases: Pipe routing, tight corner connections, hydraulic/pneumatic systems, plumbing networks
- Note: Ensure proper sealing, correct torque during installation, and compatibility with pressure and fluid type to avoid leaks or failures
₨ 999.00Elbow Fittings
₨ 999.00 -
-
-
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
-
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
-
Tapered Roller Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 415.00Tapered Roller Bearing
₨ 415.00 -
-
Tapered Roller Thrust Bearing
-
Type: Tapered roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (varies by series)
-
Performance: High stiffness, strong shock-load handling, reliable at low–moderate speeds
-
Construction: Thrust washers + tapered rollers + cage (often separable for easy installation)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs precise alignment and rigid mounting faces; use a separate radial bearing for side loads.
₨ 400.00Tapered Roller Thrust Bearing
₨ 400.00 -
-
Tee Fittings
- Type: Tee fitting (equal or reducing type)
- Load: Handles internal fluid pressure; no mechanical load-bearing function
- Cage: Not applicable (no rolling elements or retainers)
- Performance: Reliable flow distribution with minimal pressure drop when properly sized
- Construction: Solid T-shaped body with three ports; available in metal or high-strength polymer
- Use cases: Flow splitting, merging lines, pressure distribution in hydraulic/pneumatic systems
- Note: Ensure correct sizing and sealing method; mismatched threads or poor installation can lead to leakage or system inefficiency
₨ 999.00Tee Fittings
₨ 999.00 -
-
Thrust Ball Bearing
-
Type: Thrust ball bearing (brass cage)
-
Load: Designed for axial/thrust loads (along the shaft)
-
Cage: Brass retainer for durability and stable ball spacing
-
Performance: Low friction, smooth rotation, good wear resistance
-
Construction: Steel races + precision steel balls, serviceable assembly
-
Use cases: Vertical shafts, turntables, lead screws, fixtures, gearboxes (axial support)
-
Note: Limited radial load capacity—use a radial bearing if side load is significant
₨ 450.00Thrust Ball Bearing
₨ 450.00 -
SKF is one of the world’s most trusted names in bearings and rotating equipment, known for precision engineering, reliability, and long service life in demanding industrial environments. SKF products are widely used across motors, gearboxes, pumps, conveyors, machine tools, automotive systems, and heavy machinery, where smooth operation and durability are critical.
SKF offers a broad range of bearing solutions including deep groove ball bearings, angular contact bearings, tapered roller bearings, spherical and cylindrical roller bearings, needle bearings, thrust bearings, and mounted bearing units—along with seals, lubrication, and maintenance accessories. From everyday replacements to high-performance applications, SKF components are built to deliver consistent performance, reduced downtime, and dependable operation.