-
- Type: Quarter-turn rotary valve (Butterfly type)
- Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
- Cage: Typically no cage; uses a central shaft and disc mechanism
- Performance: Fast operation, moderate flow control accuracy, low resistance in open position
- Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
- Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
- Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life
₨ 999.00
-
- Type: Check valve (non-return valve)
- Load: Handles fluid pressure loads in one direction; blocks reverse pressure
- Cage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)
- Performance: Quick response, low backflow leakage, stable operation under varying pressures
- Construction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged ends
- Use cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setups
- Note: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
₨ 999.00
-
-
- Type: Elbow fitting (45° / 90°)
- Load: Handles internal fluid pressure; minimal mechanical load-bearing role
- Cage: Not applicable (no rolling elements)
- Performance: Reliable flow direction change with minimal leakage when properly installed
- Construction: Solid angled body with threaded, compression, or push-fit ends; made from metal or polymer
- Use cases: Pipe routing, tight corner connections, hydraulic/pneumatic systems, plumbing networks
- Note: Ensure proper sealing, correct torque during installation, and compatibility with pressure and fluid type to avoid leaks or failures
₨ 999.00
-
- Type: Pipe connection component (weld neck, slip-on, blind, threaded, lap joint)
- Load: Handles internal pressure, bolt clamping force, and external piping loads
- Cage: Not applicable (non-bearing component)
- Performance: Reliable sealing, high strength, stable under pressure and temperature variations
- Construction: Typically forged or cast metal with machined sealing faces and bolt holes
- Use cases: Pipe system connections, equipment mounting, flow control assemblies
- Note: Ensure correct standard, gasket, and torqueing method to avoid leakage or failure
₨ 1,000.00
-
- Type: Gear pump (external or internal gear type)
- Load: Handles hydraulic pressure loads; designed for steady fluid displacement
- Cage: No cage; uses meshing gears supported by bearings/bushings
- Performance: Steady flow, moderate pressure capability, efficient with viscous fluids
- Construction: Housing + driving and driven gears + shafts + seals; close-clearance design
- Use cases: Hydraulics, lubrication, fuel transfer, oil circulation, industrial fluid systems
- Note: Requires clean fluid and proper lubrication; avoid dry running to prevent damage
₨ 12,000.00
-
- Type: Globe valve with non-return (check) function
- Load: Handles fluid pressure loads; designed for moderate to high-pressure systems
- Cage: Internal guide or seat structure for flow control and sealing (varies by design)
- Performance: Precise flow control with reliable backflow prevention and tight sealing
- Construction: Valve body, seat, disc, stem, and check mechanism integrated into one unit
- Use cases: Flow regulation and backflow prevention in pipelines, pump systems, and industrial processes
- Note: Install in correct flow direction; not ideal for applications requiring full, unrestricted flow due to pressure drop characteristics
₨ 999.00
-
-
-
- Type: Reciprocating piston pump (positive displacement)
- Load: Handles high-pressure loads with steady flow output
- Cage: Not typically cage-based; uses piston, seals, and valve assemblies
- Performance: High efficiency, accurate flow control, capable of very high pressures
- Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
- Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
- Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
₨ 34,000.00
-
- Type: Tee fitting (equal or reducing type)
- Load: Handles internal fluid pressure; no mechanical load-bearing function
- Cage: Not applicable (no rolling elements or retainers)
- Performance: Reliable flow distribution with minimal pressure drop when properly sized
- Construction: Solid T-shaped body with three ports; available in metal or high-strength polymer
- Use cases: Flow splitting, merging lines, pressure distribution in hydraulic/pneumatic systems
- Note: Ensure correct sizing and sealing method; mismatched threads or poor installation can lead to leakage or system inefficiency
₨ 999.00
-
- Type: Threaded pipe fitting (nipple)
- Load: Handles internal fluid pressure; no mechanical load-bearing role
- Cage: Not applicable (solid fitting, no moving parts)
- Performance: Reliable sealing and connection when properly installed
- Construction: Solid cylindrical piece with external threads on both ends (full or partial threading)
- Use cases: Pipe extension, joining fittings, adapting system layouts, repairs
- Note: Always match thread standards and use proper sealing methods to prevent leaks
₨ 1,380.00
