Type: Flexible air hose for compressed air systems
Load: Internal air pressure (PSI rating); minimal external load handling
Cage: Not applicable (no internal cage; reinforced layers instead)
Performance: Consistent airflow, flexible handling, good pressure resistance
Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00
Type: Air intake filter
Load: Handles airflow pressure and particle load; not designed for mechanical loads
Cage: Typically metal mesh or polymer support structure for filter media
Performance: Efficient contaminant removal with low pressure drop and steady airflow
Construction: Outer housing + filter media (paper, foam, or synthetic) + internal support cage
Use cases: Compressors, engines, HVAC systems, pneumatic lines, industrial air intake setups
Note: Regular cleaning or replacement is required; clogged filters reduce efficiency and can damage equipment
₨ 690.00
Type: Ball valve (quarter-turn shut-off valve)
Load: Handles internal fluid pressure; not designed for mechanical load-bearing
Cage: Not applicable (solid ball with seats instead of cage structure)
Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear
₨ 999.00
Type: Rotodynamic pump (centrifugal type)
Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
Construction: Casing, impeller, shaft, seals, bearings, and drive motor
Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency
₨ 19,999.00
Type: Check valve (non-return valve)Load: Handles fluid pressure loads in one direction; blocks reverse pressureCage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)Performance: Quick response, low backflow leakage, stable operation under varying pressuresConstruction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged endsUse cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setupsNote: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
₨ 999.00
Type: Fuel and oil resistant flexible hose
Load: Handles internal fluid pressure and external bending stress
Cage: Not applicable, no internal cage structure
Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00
Type: Gate valve (rising stem or non-rising stem)
Load: Handles fluid pressure loads; not designed for mechanical side loads
Cage: Not applicable (no cage, uses gate/disc mechanism)
Performance: Low pressure drop when fully open; reliable sealing when closed; slower operation compared to other valves
Construction: Valve body + gate (disc) + stem + सीट (seat) + bonnet; typically cast or forged metal construction
Use cases: Pipeline isolation, water systems, oil and gas flow control, industrial shut-off applications
Note: Avoid using for throttling as partial opening can cause wear and vibration; operate in fully open or closed position for best performance
₨ 999.00
Type: Flexible hydraulic hose (reinforced, high-pressure)
Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
Cage: Not applicable (uses reinforcement layers instead of cage structure)
Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00
Type: PTFE (Teflon) tubing
Load: Designed for fluid and gas transfer under pressure; not load-bearing
Cage: Not applicable (no rolling elements)
Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00
Type: Flexible PVC tubing (clear or reinforced variants available)
Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
Cage: Not applicable (non-bearing product)
Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00
