-
19-Inch Essential Tool Box
Type: Portable plastic tool box
Size: 19-inch class
Material: Impact-resistant plastic body
Storage: Main compartment with top organizer
Use cases: Hand tools, meters, small spares, repair kits
Note: Good general-purpose toolbox for field and bench use₨ 5,800.0019-Inch Essential Tool Box
₨ 5,800.00 -
₨ 8,000.00Ball Nut Housing Unit | SFU 4005-4 SHAC
₨ 8,000.00 -
-
-
-
-
-
-
-
-
Diaphragm Pumps (AODD)
- Type: Air-Operated Double Diaphragm (AODD) pump
- Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
- Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
- Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
- Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
- Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
- Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00Diaphragm Pumps (AODD)
₨ 25,000.00 -
EGR Linear Rail
-
Type: Linear bearing (EGR series)
-
Load: Primarily radial loads during linear travel; limited moment load tolerance
-
Cage: Typically polymer or steel retainer (varies by model)
-
Performance: Smooth motion, low friction, good repeatability with proper alignment
-
Construction: Bearing housing + rolling elements/recirculating path + retainer; used on matching shaft/rail
-
Use cases: CNC/3D printer axes, automation slides, gantries, robotics, jigs
-
Note: Requires correct shaft hardness, alignment, and lubrication; avoid heavy side moments unless supported/rail type is used.
₨ 1,550.00EGR Linear Rail
₨ 1,550.00 -
-
GMN 12H (MGN 12H)
- Type: Linear guide block (MGN 12H series)
- Load: Supports radial, reverse radial, and moderate moment loads during linear motion
- Cage: Steel ball retainer with recirculating ball path
- Performance: High precision guidance, low friction movement, stable positioning
- Construction: Hardened steel carriage with internal recirculating ball bearings running on an MGN12 rail
- Use cases: 3D printers, laser cutters, small CNC machines, automation slides, robotics motion stages
- Note: Designed for use only with MGN12 rails; correct alignment and lubrication are required for best performance and durability.
₨ 1,380.00GMN 12H (MGN 12H)
₨ 1,380.00 -
-
-
-
-
-
-
-
-
-
