• 19-Inch Essential Tool Box

    Type: Portable plastic tool box
    Size: 19-inch class
    Material: Impact-resistant plastic body
    Storage: Main compartment with top organizer
    Use cases: Hand tools, meters, small spares, repair kits
    Note: Good general-purpose toolbox for field and bench use

  • Ball Valves

    • Type: Ball valve (quarter-turn shut-off valve)
    • Load: Handles internal fluid pressure; not designed for mechanical load-bearing
    • Cage: Not applicable (solid ball with seats instead of cage structure)
    • Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
    • Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
    • Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
    • Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear

    Ball Valves

     999.00
  • Centrifugal Pumps

    • Type: Rotodynamic pump (centrifugal type)
    • Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
    • Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
    • Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
    • Construction: Casing, impeller, shaft, seals, bearings, and drive motor
    • Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
    • Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency

    Centrifugal Pumps

     19,999.00
  • Check Valves (Non-Return Valves)

    • Type: Check valve (non-return valve)
    • Load: Handles fluid pressure loads in one direction; blocks reverse pressure
    • Cage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)
    • Performance: Quick response, low backflow leakage, stable operation under varying pressures
    • Construction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged ends
    • Use cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setups
    • Note: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
  • Gate Valves

    • Type: Gate valve (rising stem or non-rising stem)
    • Load: Handles fluid pressure loads; not designed for mechanical side loads
    • Cage: Not applicable (no cage, uses gate/disc mechanism)
    • Performance: Low pressure drop when fully open; reliable sealing when closed; slower operation compared to other valves
    • Construction: Valve body + gate (disc) + stem + सीट (seat) + bonnet; typically cast or forged metal construction
    • Use cases: Pipeline isolation, water systems, oil and gas flow control, industrial shut-off applications
    • Note: Avoid using for throttling as partial opening can cause wear and vibration; operate in fully open or closed position for best performance

    Gate Valves

     999.00
  • MetroMax i Industrial Wire Shelving Rack 4 Tier

    Type: 4-tier industrial wire shelving rack
    Material: Polymer-coated steel/wire construction
    Load: Suitable for medium to heavy storage loads
    Design: Open-wire structure for airflow and visibility
    Use cases: Component bins, tooling, cartons, lab supplies, maintenance stores
    Note: Best used indoors; confirm shelf size and total load before ordering.

Main Menu