- Type: Thrust needle roller bearing set (AXK series with 2 AS washers)
- Load: Designed for high axial loads, minimal radial load capacity
- Cage: Steel cage retaining precision needle rollers
- Performance: Low friction axial rotation with high load capacity and compact height
- Construction: Needle roller cage assembly (AXK) combined with two thrust washers (AS)
- Use cases: Gearboxes, automotive assemblies, machine tools, steering systems, industrial machinery
- Note: Ensure correct lubrication and proper washer alignment; not intended for significant radial loads.
-
-
-
-
-
-
-
-
-
-
-
BR 324116
- Type: Needle roller bearing
- Load: Designed mainly for high radial loads with limited axial load capability
- Cage: Steel cage or retainer to maintain roller spacing and alignment
- Performance: High load carrying capacity, smooth rotation, efficient in compact spaces
- Construction: Outer ring with precision needle rollers and cage assembly
- Use cases: Gear systems, transmissions, industrial machines, automotive components
- Note: Requires hardened shaft or inner ring and proper lubrication for long service life
₨ 89.00BR 324116
₨ 89.00 -
BR 162416
- Type: Drawn cup needle roller bearing (BR series)
- Load: Designed primarily for high radial loads with minimal axial load capability
- Cage: Usually none (full complement needle rollers) or steel retainer depending on design
- Performance: High load capacity for compact size, low friction rotation when lubricated
- Construction: Thin drawn steel outer shell with needle rollers arranged in parallel
- Use cases: Automotive gear systems, power tools, transmissions, compact machinery
- Note: Shaft often acts as the inner raceway, so proper hardness, finish, and lubrication are critical for durability.
₨ 90.00BR 162416
₨ 90.00 -
AXK+2AS 100135
₨ 123.00AXK+2AS 100135
₨ 123.00 -
AXK+2AS 2035
- Type: Thrust needle roller bearing set (AXK cage assembly with two AS washers)
- Load: Designed to support high axial loads, not suitable for radial loads
- Cage: Steel cage guiding needle rollers for even load distribution
- Performance: Low friction axial movement with high load carrying capacity
- Construction: Needle roller cage assembly paired with two hardened thrust washers
- Use cases: Gearboxes, transmissions, machine tools, pumps, and industrial equipment
- Note: Requires proper lubrication and correct axial alignment for optimal service life
₨ 230.00AXK+2AS 2035
₨ 230.00 -
SH 25
-
Type: Pillow block bearing (WERB series)
-
Load: Radial and limited axial loads
-
Cage: Sealed bearing, usually with polymer or metal retainer
-
Performance: Reliable rotation, moderate speed, low maintenance
-
Construction: Cast housing + rolling bearing + integrated seals
-
Use cases: Conveyors, fans, pumps, agricultural machinery, general industrial shafts
-
Note: Pre-lubricated and sealed; verify shaft alignment and load limits for optimal life
₨ 234.00SH 25
₨ 234.00 -
-
SH 16
- Type: Mounted pillow block bearing (SH series)
- Load: Primarily radial, some axial load capacity
- Cage: Steel or polymer retainer depending on model
- Performance: Stable rotation, low vibration, long service life with proper lubrication
- Construction: Cast iron housing with mounted ball bearing
- Use cases: Conveyors, fans, agricultural machines, general industrial equipment
- Note: Verify shaft size, alignment, and lubrication needs; avoid overloading or harsh conditions without proper sealing
₨ 300.00SH 16
₨ 300.00 -
AXK+2AS 5578
- Type: Thrust needle roller bearing set (AXK bearing with 2 AS washers)
- Load: Designed primarily for high axial loads; not suitable for radial loads
- Cage: Steel cage guiding needle rollers for uniform load distribution
- Performance: Low friction axial rotation with high load capacity in a compact space
- Construction: Needle roller and cage assembly (AXK) combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive systems, machine tools, pumps, industrial rotating assemblies
- Note: Requires hardened, flat running surfaces; ensure proper lubrication and avoid radial loading.
₨ 340.00AXK+2AS 5578
₨ 340.00 -
-
SFU 2005-3
- Type: Precision ball screw assembly (SFU 2005 series, triple nut configuration)
- Load: Designed to support axial loads during linear motion; limited tolerance to radial or side loads
- Cage: Internal ball recirculation system with steel balls and retainer channels
- Performance: High efficiency motion transfer, smooth travel, good repeatability for positioning systems
- Construction: Hardened steel threaded screw shaft with recirculating ball nut assembly
- Use cases: CNC axes, automation stages, robotic motion systems, linear actuators, precision positioning equipment
- Note: Requires correct alignment, end support bearings, and regular lubrication for long service life and accurate operation.
₨ 456.00SFU 2005-3
₨ 456.00 -
Coupling D65-90-20-35
-
Type: Flexible shaft coupling (D65-90-20-35 series)
-
Load: Transmits torque between shafts; handles moderate misalignment and shock loads
-
Cage: Not applicable; uses flexible elements or elastomeric insert depending on design
-
Performance: Smooth torque transmission with vibration damping; reduces stress on connected components
-
Construction: Two hubs connected by flexible element; may include elastomer or metallic flex segments
-
Use cases: Motors, pumps, conveyors, gearboxes, CNC machinery, light automation
-
Note: Ensure shaft diameters and torque ratings match; stay within specified misalignment limits
₨ 567.00Coupling D65-90-20-35
₨ 567.00 -
-
-
-
-
EGR 15
- Type: Linear guide block (EGR 15 WERB series)
- Load: Supports radial and moderate moment loads during guided linear travel
- Cage: Internal retainer guiding recirculating rolling elements (steel or polymer depending on model)
- Performance: Smooth motion, low friction, accurate positioning when aligned correctly
- Construction: Precision machined block body with recirculating ball path designed to run on EGR 15 linear rail
- Use cases: CNC machines, 3D printers, automation equipment, gantries, robotics slides
- Note: Must be used with matching EGR 15 rail, proper alignment and lubrication required for best performance.
₨ 780.00EGR 15
₨ 780.00