- Type: Thrust needle roller bearing set (AXK series with 2 AS washers)
- Load: Designed for high axial loads, minimal radial load capacity
- Cage: Steel cage retaining precision needle rollers
- Performance: Low friction axial rotation with high load capacity and compact height
- Construction: Needle roller cage assembly (AXK) combined with two thrust washers (AS)
- Use cases: Gearboxes, automotive assemblies, machine tools, steering systems, industrial machinery
- Note: Ensure correct lubrication and proper washer alignment; not intended for significant radial loads.
-
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
AXK+2AS 100135
₨ 123.00AXK+2AS 100135
₨ 123.00 -
AXK+2AS 110145
- Type: Thrust needle roller bearing set (AXK + 2AS series)
- Load: Designed for high axial loads, not intended for radial loads
- Cage: Steel cage holding needle rollers in a thrust cage assembly
- Performance: Low friction rotation with high axial load capacity in compact spaces
- Construction: Needle roller cage assembly combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive assemblies, machine tools, pumps, and industrial machinery
- Note: Requires hardened and flat running surfaces and proper lubrication for best performance and durability.
₨ 1,600.00AXK+2AS 110145
₨ 1,600.00 -
AXK+2AS 130170
- Type: Axial needle roller and cage thrust assembly with thrust washers (AXK plus AS)
- Load: Heavy axial loads in one direction; minimal radial load capacity
- Cage: Steel cage holding needle rollers
- Performance: High axial stiffness and load capacity in tight space
- Construction: Roller and cage thrust unit plus two thin thrust washers
- Use cases: Gearbox thrust support, pump/compressor axial support, machine tool thrust points, industrial drives
- Note: Requires matching raceways on shaft/housing with correct washers, and proper lubrication for long life.
₨ 1,900.00AXK+2AS 130170
₨ 1,900.00 -
AXK+2AS 2035
- Type: Thrust needle roller bearing set (AXK cage assembly with two AS washers)
- Load: Designed to support high axial loads, not suitable for radial loads
- Cage: Steel cage guiding needle rollers for even load distribution
- Performance: Low friction axial movement with high load carrying capacity
- Construction: Needle roller cage assembly paired with two hardened thrust washers
- Use cases: Gearboxes, transmissions, machine tools, pumps, and industrial equipment
- Note: Requires proper lubrication and correct axial alignment for optimal service life
₨ 230.00AXK+2AS 2035
₨ 230.00 -
AXK+2AS 5578
- Type: Thrust needle roller bearing set (AXK bearing with 2 AS washers)
- Load: Designed primarily for high axial loads; not suitable for radial loads
- Cage: Steel cage guiding needle rollers for uniform load distribution
- Performance: Low friction axial rotation with high load capacity in a compact space
- Construction: Needle roller and cage assembly (AXK) combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive systems, machine tools, pumps, industrial rotating assemblies
- Note: Requires hardened, flat running surfaces; ensure proper lubrication and avoid radial loading.
₨ 340.00AXK+2AS 5578
₨ 340.00 -
BR 162416
- Type: Drawn cup needle roller bearing (BR series)
- Load: Designed primarily for high radial loads with minimal axial load capability
- Cage: Usually none (full complement needle rollers) or steel retainer depending on design
- Performance: High load capacity for compact size, low friction rotation when lubricated
- Construction: Thin drawn steel outer shell with needle rollers arranged in parallel
- Use cases: Automotive gear systems, power tools, transmissions, compact machinery
- Note: Shaft often acts as the inner raceway, so proper hardness, finish, and lubrication are critical for durability.
₨ 90.00BR 162416
₨ 90.00 -
BR 324116
- Type: Needle roller bearing
- Load: Designed mainly for high radial loads with limited axial load capability
- Cage: Steel cage or retainer to maintain roller spacing and alignment
- Performance: High load carrying capacity, smooth rotation, efficient in compact spaces
- Construction: Outer ring with precision needle rollers and cage assembly
- Use cases: Gear systems, transmissions, industrial machines, automotive components
- Note: Requires hardened shaft or inner ring and proper lubrication for long service life
₨ 89.00BR 324116
₨ 89.00 -
Butterfly Valves
- Type: Quarter-turn rotary valve (Butterfly type)
- Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
- Cage: Typically no cage; uses a central shaft and disc mechanism
- Performance: Fast operation, moderate flow control accuracy, low resistance in open position
- Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
- Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
- Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life
₨ 999.00Butterfly Valves
₨ 999.00 -
-
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
Diaphragm Pumps (AODD)
- Type: Air-Operated Double Diaphragm (AODD) pump
- Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
- Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
- Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
- Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
- Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
- Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00Diaphragm Pumps (AODD)
₨ 25,000.00 -
₨ 17,685.00DISCOVERY STM32F723 EVAL BRD (EU Version)
₨ 17,685.00 -
₨ 42,318.00DISCOVERY STM32H747XI EVAL BRD (EU Version)
₨ 42,318.00 -
-
-
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
-
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
SKF is one of the world’s most trusted names in bearings and rotating equipment, known for precision engineering, reliability, and long service life in demanding industrial environments. SKF products are widely used across motors, gearboxes, pumps, conveyors, machine tools, automotive systems, and heavy machinery, where smooth operation and durability are critical.
SKF offers a broad range of bearing solutions including deep groove ball bearings, angular contact bearings, tapered roller bearings, spherical and cylindrical roller bearings, needle bearings, thrust bearings, and mounted bearing units—along with seals, lubrication, and maintenance accessories. From everyday replacements to high-performance applications, SKF components are built to deliver consistent performance, reduced downtime, and dependable operation.