-
-
-
- Type: Check valve (non-return valve)
- Load: Handles fluid pressure loads in one direction; blocks reverse pressure
- Cage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)
- Performance: Quick response, low backflow leakage, stable operation under varying pressures
- Construction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged ends
- Use cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setups
- Note: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
₨ 999.00
-
- Type: Gate valve (rising stem or non-rising stem)
- Load: Handles fluid pressure loads; not designed for mechanical side loads
- Cage: Not applicable (no cage, uses gate/disc mechanism)
- Performance: Low pressure drop when fully open; reliable sealing when closed; slower operation compared to other valves
- Construction: Valve body + gate (disc) + stem + सीट (seat) + bonnet; typically cast or forged metal construction
- Use cases: Pipeline isolation, water systems, oil and gas flow control, industrial shut-off applications
- Note: Avoid using for throttling as partial opening can cause wear and vibration; operate in fully open or closed position for best performance
₨ 999.00
-
- Type: Ball valve (quarter-turn shut-off valve)
- Load: Handles internal fluid pressure; not designed for mechanical load-bearing
- Cage: Not applicable (solid ball with seats instead of cage structure)
- Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
- Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
- Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
- Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear
₨ 999.00
-
- Type: Rotodynamic pump (centrifugal type)
- Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
- Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
- Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
- Construction: Casing, impeller, shaft, seals, bearings, and drive motor
- Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
- Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency
₨ 19,999.00
-
- Type: Needle roller bearing
- Load: Designed mainly for high radial loads with limited axial load capability
- Cage: Steel cage or retainer to maintain roller spacing and alignment
- Performance: High load carrying capacity, smooth rotation, efficient in compact spaces
- Construction: Outer ring with precision needle rollers and cage assembly
- Use cases: Gear systems, transmissions, industrial machines, automotive components
- Note: Requires hardened shaft or inner ring and proper lubrication for long service life
₨ 89.00
-
- Type: Drawn cup needle roller bearing (BR series)
- Load: Designed primarily for high radial loads with minimal axial load capability
- Cage: Usually none (full complement needle rollers) or steel retainer depending on design
- Performance: High load capacity for compact size, low friction rotation when lubricated
- Construction: Thin drawn steel outer shell with needle rollers arranged in parallel
- Use cases: Automotive gear systems, power tools, transmissions, compact machinery
- Note: Shaft often acts as the inner raceway, so proper hardness, finish, and lubrication are critical for durability.
₨ 90.00
-
- Type: Axial needle roller and cage thrust assembly with thrust washers (AXK plus AS)
- Load: Heavy axial loads in one direction; minimal radial load capacity
- Cage: Steel cage holding needle rollers
- Performance: High axial stiffness and load capacity in tight space
- Construction: Roller and cage thrust unit plus two thin thrust washers
- Use cases: Gearbox thrust support, pump/compressor axial support, machine tool thrust points, industrial drives
- Note: Requires matching raceways on shaft/housing with correct washers, and proper lubrication for long life.
₨ 1,900.00
-
- Type: Thrust needle roller bearing set (AXK bearing with 2 AS washers)
- Load: Designed primarily for high axial loads; not suitable for radial loads
- Cage: Steel cage guiding needle rollers for uniform load distribution
- Performance: Low friction axial rotation with high load capacity in a compact space
- Construction: Needle roller and cage assembly (AXK) combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive systems, machine tools, pumps, industrial rotating assemblies
- Note: Requires hardened, flat running surfaces; ensure proper lubrication and avoid radial loading.
₨ 340.00
-
- Type: Thrust needle roller bearing set (AXK + 2AS series)
- Load: Designed for high axial loads, not intended for radial loads
- Cage: Steel cage holding needle rollers in a thrust cage assembly
- Performance: Low friction rotation with high axial load capacity in compact spaces
- Construction: Needle roller cage assembly combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive assemblies, machine tools, pumps, and industrial machinery
- Note: Requires hardened and flat running surfaces and proper lubrication for best performance and durability.
₨ 1,600.00
-
- Type: Thrust needle roller bearing set (AXK series with 2 AS washers)
- Load: Designed for high axial loads, minimal radial load capacity
- Cage: Steel cage retaining precision needle rollers
- Performance: Low friction axial rotation with high load capacity and compact height
- Construction: Needle roller cage assembly (AXK) combined with two thrust washers (AS)
- Use cases: Gearboxes, automotive assemblies, machine tools, steering systems, industrial machinery
- Note: Ensure correct lubrication and proper washer alignment; not intended for significant radial loads.
₨ 123.00
-
- Type: Thrust needle roller bearing set (AXK cage assembly with two AS washers)
- Load: Designed to support high axial loads, not suitable for radial loads
- Cage: Steel cage guiding needle rollers for even load distribution
- Performance: Low friction axial movement with high load carrying capacity
- Construction: Needle roller cage assembly paired with two hardened thrust washers
- Use cases: Gearboxes, transmissions, machine tools, pumps, and industrial equipment
- Note: Requires proper lubrication and correct axial alignment for optimal service life
₨ 230.00
