Electrical Components Archives

Type: Stepper motor connection cable for NEMA 17 motors
Load: Electrical signal and power transmission for motor phases
Cage: Not applicable (electrical cable assembly)
Performance: Stable signal transfer, flexible movement, reliable electrical contact
Construction: Multi core insulated copper wires with protective outer jacket and motor/controller connectors
Use cases: 3D printers, CNC machines, robotics systems, automation equipment, DIY electronics
Note: Verify connector compatibility and pin order before installation to avoid incorrect motor wiring.

Type: Momentary pushbutton switch, 4-pin
Load: Low-voltage, low-current switching
Cage: N/A (mechanical switch housing)
Performance: Reliable tactile response, fast actuation, long service life under rated conditions
Construction: Plastic actuator, metal contacts, PCB or panel mount
Use cases: Electronics projects, control panels, appliances, DIY boards, industrial interfaces
Note: Check voltage/current rating, mount securely, avoid exposure to harsh environments

Type: Switching Mode Power Supply (SMPS)
Load: High-current DC devices requiring 48V output
Cage: Enclosed metal casing with ventilation slots
Performance: Stable output, high efficiency, thermal and electrical protection
Construction: PCB-based SMPS with transformer, switching ICs, and protective circuits
Use cases: Industrial machines, LED arrays, 3D printers, CNC equipment, robotics, battery charging
Note: Ensure proper ventilation, match voltage/current specs, avoid overloads, and provide surge protection if needed

Type: High power electrical connector pair (male plug and female socket)
Load: Up to 500V and 90A electrical current capacity
Cage: Internal metal contact terminals with insulated housing
Performance: Stable electrical conductivity with low contact resistance and reliable connection
Construction: Heat resistant insulating body with conductive metal terminals and plug socket interface
Use cases: EV charging connectors, battery systems, solar storage wiring, industrial power equipment, DC power distribution
Note: Ensure correct cable gauge and secure termination. Avoid loose connections to prevent heat buildup during high current use.

Type: Push-button switch with wire
Load: Low-voltage DC, small current circuits
Cage: Plastic housing protecting internal contacts
Performance: Reliable actuation, moderate environmental resistance
Construction: Plastic button, internal spring/contacts, pre-attached wires
Use cases: E-bike lights, horns, mode switches, throttle or accessory activation
Note: Match voltage/current ratings, protect from water immersion, avoid exceeding rated load

Type: Electric bike wiring harness for brushless motor systems
Load: Carries low voltage control signals and battery power between components
Cage: Not applicable, electrical wiring system rather than a rolling bearing
Performance: Stable signal transmission and reliable power distribution across e bike components
Construction: Multi wire harness with insulated cables, protective sleeves, and plug connectors for controller, throttle, motor, brakes, and display
Use cases: Electric bike assembly, repair, controller replacement, and brushless motor conversion kits
Note: Ensure connector compatibility and voltage match before installation; secure routing helps prevent wire damage during riding.

Type: Bullet electrical connector (3.5 mm)
Load: Electrical current transfer for low to moderate power circuits
Cage: Not applicable; solid metal contact design
Performance: Low resistance, stable conductivity, reliable repeated connections
Construction: Gold-plated brass connector body designed for soldered wire termination
Use cases: RC motors, ESC connections, battery leads, drones, robotics wiring
Note: Use proper soldering technique and insulation; match wire gauge and current rating for safe operation.

Type: Momentary or latching push button switch
Load: Electrical switching; low to moderate current ratings
Cage: Not applicable; internal mechanism held by housing
Performance: Reliable on/off switching, tactile feedback, long life
Construction: Plastic or metal housing, conductive contacts, actuator button
Use cases: Control panels, appliances, industrial machines, DIY electronics, testing rigs
Note: Verify voltage/current ratings and mounting cutout; consider environmental protection if used outdoors or in dusty areas

Electronics and Mechanical Components Store