-
Air Compressor Hose
- Type: Flexible air hose for compressed air systems
- Load: Internal air pressure (PSI rating); minimal external load handling
- Cage: Not applicable (no internal cage; reinforced layers instead)
- Performance: Consistent airflow, flexible handling, good pressure resistance
- Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
- Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
- Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00Air Compressor Hose
₨ 1,380.00 -
Air Intake Filters
- Type: Air intake filter
- Load: Handles airflow pressure and particle load; not designed for mechanical loads
- Cage: Typically metal mesh or polymer support structure for filter media
- Performance: Efficient contaminant removal with low pressure drop and steady airflow
- Construction: Outer housing + filter media (paper, foam, or synthetic) + internal support cage
- Use cases: Compressors, engines, HVAC systems, pneumatic lines, industrial air intake setups
- Note: Regular cleaning or replacement is required; clogged filters reduce efficiency and can damage equipment
₨ 690.00Air Intake Filters
₨ 690.00 -
Ball Valves
- Type: Ball valve (quarter-turn shut-off valve)
- Load: Handles internal fluid pressure; not designed for mechanical load-bearing
- Cage: Not applicable (solid ball with seats instead of cage structure)
- Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
- Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
- Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
- Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear
₨ 999.00Ball Valves
₨ 999.00 -
Butterfly Valves
- Type: Quarter-turn rotary valve (Butterfly type)
- Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
- Cage: Typically no cage; uses a central shaft and disc mechanism
- Performance: Fast operation, moderate flow control accuracy, low resistance in open position
- Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
- Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
- Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life
₨ 999.00Butterfly Valves
₨ 999.00 -
Cam and Groove Couplings (Camlocks)
- Type: Quick-connect coupling (Cam and Groove, Camlock)
- Load: Designed for fluid pressure loads, not mechanical or structural loads
- Cage: Not applicable (no internal bearing cage; uses gasket sealing)
- Performance: Fast operation, reliable sealing, moderate pressure handling depending on material and size
- Construction: Male adapter (groove) and female coupler (cam arms) with gasket seal, typically machined or molded body
- Use cases: Hose connections for fluid transfer, tankers, pumps, industrial pipelines, agricultural systems
- Note: Ensure proper locking of cam arms before operation; not suitable for high-pressure compressed air or steam unless specifically rated
₨ 1,380.00Cam and Groove Couplings (Camlocks)
₨ 1,380.00 -
Centrifugal Pumps
- Type: Rotodynamic pump (centrifugal type)
- Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
- Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
- Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
- Construction: Casing, impeller, shaft, seals, bearings, and drive motor
- Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
- Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency
₨ 19,999.00Centrifugal Pumps
₨ 19,999.00 -
-
Compressed Air Filters (FRL Units)
- Type: FRL unit (Filter, Regulator, Lubricator combination)
- Load: Handles compressed air flow; not a load-bearing component
- Cage: Not applicable (no rolling elements)
- Performance: Clean, regulated, and lubricated air supply for efficient pneumatic operation
- Construction: Filter housing, regulator assembly, lubricator unit, transparent bowl, internal filtration element
- Use cases: Air tool systems, pneumatic automation, compressor lines, industrial air preparation
- Note: Requires routine maintenance including filter replacement, moisture draining, and lubrication checks for consistent performance
₨ 500.00Compressed Air Filters (FRL Units)
₨ 500.00 -
Diaphragm Pumps (AODD)
- Type: Air-Operated Double Diaphragm (AODD) pump
- Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
- Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
- Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
- Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
- Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
- Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00Diaphragm Pumps (AODD)
₨ 25,000.00 -
Elbow Fittings
- Type: Elbow fitting (45° / 90°)
- Load: Handles internal fluid pressure; minimal mechanical load-bearing role
- Cage: Not applicable (no rolling elements)
- Performance: Reliable flow direction change with minimal leakage when properly installed
- Construction: Solid angled body with threaded, compression, or push-fit ends; made from metal or polymer
- Use cases: Pipe routing, tight corner connections, hydraulic/pneumatic systems, plumbing networks
- Note: Ensure proper sealing, correct torque during installation, and compatibility with pressure and fluid type to avoid leaks or failures
₨ 999.00Elbow Fittings
₨ 999.00 -
Fuel and Oil Hoses
- Type: Fuel and oil resistant flexible hose
- Load: Handles internal fluid pressure and external bending stress
- Cage: Not applicable, no internal cage structure
- Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
- Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
- Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
- Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00Fuel and Oil Hoses
₨ 999.00 -
-
-
-
-
Hydraulic Hoses
- Type: Flexible hydraulic hose (reinforced, high-pressure)
- Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
- Cage: Not applicable (uses reinforcement layers instead of cage structure)
- Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
- Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
- Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
- Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00Hydraulic Hoses
₨ 1,000.00 -
O-Ring Kits
- Type: O-ring kit (PVC, assorted sizes)
- Load: Suitable for low to moderate pressure sealing; not for high-load dynamic sealing
- Cage: Not applicable (solid elastomer ring design)
- Performance: Reliable sealing for basic applications; moderate flexibility and chemical resistance
- Construction: Solid PVC rings molded in various standard sizes, stored in organized kit box
- Use cases: Plumbing repairs, air line sealing, general maintenance, light industrial use
- Note: Avoid high temperatures and aggressive chemicals; ensure proper sizing and groove fit for effective sealing
₨ 5,000.00O-Ring Kits
₨ 5,000.00 -
Oil Filters
- Type: Oil filter (inline, spin-on, or cartridge type)
- Load: Handles oil flow pressure; not a load-bearing component
- Cage: Not applicable (uses internal filter media support structure)
- Performance: Efficient contaminant removal, stable flow, protects system components
- Construction: Outer casing, filter media, end caps, sealing gasket, and internal support core
- Use cases: Engines, hydraulic units, compressors, gear systems, industrial lubrication systems
- Note: Replace at recommended intervals; clogged filters can reduce performance and damage equipment
₨ 500.00Oil Filters
₨ 500.00 -
-
PTFE (Teflon) Tubing
- Type: PTFE (Teflon) tubing
- Load: Designed for fluid and gas transfer under pressure; not load-bearing
- Cage: Not applicable (no rolling elements)
- Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
- Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
- Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
- Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00PTFE (Teflon) Tubing
₨ 1,000.00 -
PVC Tubing (Polyvinyl Chloride)
- Type: Flexible PVC tubing (clear or reinforced variants available)
- Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
- Cage: Not applicable (non-bearing product)
- Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
- Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
- Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
- Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00PVC Tubing (Polyvinyl Chloride)
₨ 999.00 -
-
Tee Fittings
- Type: Tee fitting (equal or reducing type)
- Load: Handles internal fluid pressure; no mechanical load-bearing function
- Cage: Not applicable (no rolling elements or retainers)
- Performance: Reliable flow distribution with minimal pressure drop when properly sized
- Construction: Solid T-shaped body with three ports; available in metal or high-strength polymer
- Use cases: Flow splitting, merging lines, pressure distribution in hydraulic/pneumatic systems
- Note: Ensure correct sizing and sealing method; mismatched threads or poor installation can lead to leakage or system inefficiency
₨ 999.00Tee Fittings
₨ 999.00
