Type: Water and particulate separator (air line filter unit)
Load: Handles flow pressure and contaminant load within rated capacity
Cage: Not applicable (uses internal filter element instead of bearing cage)
Performance: High moisture separation efficiency, consistent filtration, low pressure drop
Construction: Housing (metal or polymer bowl), filter element, baffle or centrifugal mechanism, drain valve
Use cases: Air compressors, pneumatic systems, spray booths, industrial air lines, fluid filtration setups
Note: Install in correct flow direction and maintain regularly by draining collected water and replacing filter elements when needed
₨ 500.00
Type: FRL unit (Filter, Regulator, Lubricator combination)
Load: Handles compressed air flow; not a load-bearing component
Cage: Not applicable (no rolling elements)
Performance: Clean, regulated, and lubricated air supply for efficient pneumatic operation
Construction: Filter housing, regulator assembly, lubricator unit, transparent bowl, internal filtration element
Use cases: Air tool systems, pneumatic automation, compressor lines, industrial air preparation
Note: Requires routine maintenance including filter replacement, moisture draining, and lubrication checks for consistent performance
₨ 500.00
Type: Fuel filter (inline, cartridge, or spin-on type)
Load: Handles fuel flow pressure; not designed for mechanical load bearing
Cage: Internal support structure for filter media (metal or polymer, varies by model)
Performance: High filtration efficiency, stable flow rate, protects against clogging and contamination
Construction: Outer housing + filter media (paper, synthetic, or mesh) + internal support core + inlet/outlet ports
Use cases: Automotive fuel systems, generators, industrial engines, fuel transfer and storage systems
Note: Regular replacement is important; clogged filters reduce performance and can damage fuel system components
₨ 990.00
Type: Air intake filter
Load: Handles airflow pressure and particle load; not designed for mechanical loads
Cage: Typically metal mesh or polymer support structure for filter media
Performance: Efficient contaminant removal with low pressure drop and steady airflow
Construction: Outer housing + filter media (paper, foam, or synthetic) + internal support cage
Use cases: Compressors, engines, HVAC systems, pneumatic lines, industrial air intake setups
Note: Regular cleaning or replacement is required; clogged filters reduce efficiency and can damage equipment
₨ 690.00
Type: Oil filter (inline, spin-on, or cartridge type)
Load: Handles oil flow pressure; not a load-bearing component
Cage: Not applicable (uses internal filter media support structure)
Performance: Efficient contaminant removal, stable flow, protects system components
Construction: Outer casing, filter media, end caps, sealing gasket, and internal support core
Use cases: Engines, hydraulic units, compressors, gear systems, industrial lubrication systems
Note: Replace at recommended intervals; clogged filters can reduce performance and damage equipment
₨ 500.00
Type: Globe valve with non-return (check) function
Load: Handles fluid pressure loads; designed for moderate to high-pressure systems
Cage: Internal guide or seat structure for flow control and sealing (varies by design)
Performance: Precise flow control with reliable backflow prevention and tight sealing
Construction: Valve body, seat, disc, stem, and check mechanism integrated into one unit
Use cases: Flow regulation and backflow prevention in pipelines, pump systems, and industrial processes
Note: Install in correct flow direction; not ideal for applications requiring full, unrestricted flow due to pressure drop characteristics
₨ 999.00
Type: Check valve (non-return valve)Load: Handles fluid pressure loads in one direction; blocks reverse pressureCage: Internal guide or spring mechanism (varies by design such as spring-loaded or swing type)Performance: Quick response, low backflow leakage, stable operation under varying pressuresConstruction: Valve body, seat, disc/ball or poppet, optional spring mechanism, threaded or flanged endsUse cases: Pumps, compressors, pipelines, hydraulic and pneumatic systems, water and fluid control setupsNote: Install in correct flow direction (marked on body); ensure compatibility with pressure, fluid type, and operating conditions
₨ 999.00
Type: Quarter-turn rotary valve (Butterfly type)
Load: Handles fluid pressure loads; moderate pressure handling compared to ball or gate valves
Cage: Typically no cage; uses a central shaft and disc mechanism
Performance: Fast operation, moderate flow control accuracy, low resistance in open position
Construction: Valve body + rotating disc + central shaft + seat (resilient or metal) + actuator/handle
Use cases: Water systems, HVAC, gas lines, chemical flow control, irrigation, industrial piping
Note: Not ideal for high-pressure precision throttling; ensure proper sealing material for leak prevention and long service life
₨ 999.00
Type: Gate valve (rising stem or non-rising stem)
Load: Handles fluid pressure loads; not designed for mechanical side loads
Cage: Not applicable (no cage, uses gate/disc mechanism)
Performance: Low pressure drop when fully open; reliable sealing when closed; slower operation compared to other valves
Construction: Valve body + gate (disc) + stem + सीट (seat) + bonnet; typically cast or forged metal construction
Use cases: Pipeline isolation, water systems, oil and gas flow control, industrial shut-off applications
Note: Avoid using for throttling as partial opening can cause wear and vibration; operate in fully open or closed position for best performance
₨ 999.00
Type: Ball valve (quarter-turn shut-off valve)
Load: Handles internal fluid pressure; not designed for mechanical load-bearing
Cage: Not applicable (solid ball with seats instead of cage structure)
Performance: Fast operation, low pressure drop, reliable sealing, long cycle life
Construction: Valve body + perforated ball + seats (PTFE or similar) + stem + handle/actuator
Use cases: Fluid shut-off in pipelines, hydraulic and pneumatic systems, water and oil control, industrial processing
Note: Best for on or off control; not ideal for precise flow regulation as partial opening can cause seat wear
₨ 999.00
Type: Reciprocating piston pump (positive displacement)
Load: Handles high-pressure loads with steady flow output
Cage: Not typically cage-based; uses piston, seals, and valve assemblies
Performance: High efficiency, accurate flow control, capable of very high pressures
Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
₨ 34,000.00
Type: Gear pump (external or internal gear type)
Load: Handles hydraulic pressure loads; designed for steady fluid displacement
Cage: No cage; uses meshing gears supported by bearings/bushings
Performance: Steady flow, moderate pressure capability, efficient with viscous fluids
Construction: Housing + driving and driven gears + shafts + seals; close-clearance design
Use cases: Hydraulics, lubrication, fuel transfer, oil circulation, industrial fluid systems
Note: Requires clean fluid and proper lubrication; avoid dry running to prevent damage
₨ 12,000.00
Type: Submersible pump (water/sewage/deep well types)
Load: Handles hydraulic load based on fluid head and flow demand
Cage: Not applicable (sealed motor and impeller assembly)
Performance: High efficiency, consistent flow, self-priming due to submerged operation
Construction: Sealed motor housing, impeller, shaft, mechanical seals, and waterproof cable
Use cases: Borewells, drainage pits, sewage systems, irrigation, construction sites
Note: Must remain submerged during operation for cooling; running dry can damage the pump
₨ 35,000.00
Type: Air-Operated Double Diaphragm (AODD) pump
Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00
Type: Rotodynamic pump (centrifugal type)
Load: Primarily hydraulic load from fluid movement; radial and axial forces on impeller
Cage: Not applicable (no rolling element cage; uses impeller and shaft system)
Performance: Steady flow, moderate to high efficiency, best for low-viscosity fluids
Construction: Casing, impeller, shaft, seals, bearings, and drive motor
Use cases: Water transfer, irrigation, HVAC systems, industrial fluid movement, cooling circuits
Note: Requires proper priming before operation; avoid dry running and ensure correct sizing for best efficiency
₨ 19,999.00
Type: O-ring kit (PVC, assorted sizes)
Load: Suitable for low to moderate pressure sealing; not for high-load dynamic sealing
Cage: Not applicable (solid elastomer ring design)
Performance: Reliable sealing for basic applications; moderate flexibility and chemical resistance
Construction: Solid PVC rings molded in various standard sizes, stored in organized kit box
Use cases: Plumbing repairs, air line sealing, general maintenance, light industrial use
Note: Avoid high temperatures and aggressive chemicals; ensure proper sizing and groove fit for effective sealing
₨ 5,000.00
Type: Flexible PVC tubing (clear or reinforced variants available)
Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
Cage: Not applicable (non-bearing product)
Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00
Type: Flexible hydraulic hose (reinforced, high-pressure)
Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
Cage: Not applicable (uses reinforcement layers instead of cage structure)
Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00
Type: PTFE (Teflon) tubing
Load: Designed for fluid and gas transfer under pressure; not load-bearing
Cage: Not applicable (no rolling elements)
Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00
Type: Flexible air hose for compressed air systems
Load: Internal air pressure (PSI rating); minimal external load handling
Cage: Not applicable (no internal cage; reinforced layers instead)
Performance: Consistent airflow, flexible handling, good pressure resistance
Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00
Type: Fuel and oil resistant flexible hose
Load: Handles internal fluid pressure and external bending stress
Cage: Not applicable, no internal cage structure
Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00
Type: Tee fitting (equal or reducing type)
Load: Handles internal fluid pressure; no mechanical load-bearing function
Cage: Not applicable (no rolling elements or retainers)
Performance: Reliable flow distribution with minimal pressure drop when properly sized
Construction: Solid T-shaped body with three ports; available in metal or high-strength polymer
Use cases: Flow splitting, merging lines, pressure distribution in hydraulic/pneumatic systems
Note: Ensure correct sizing and sealing method; mismatched threads or poor installation can lead to leakage or system inefficiency
₨ 999.00
Type: Pipe connection component (weld neck, slip-on, blind, threaded, lap joint)
Load: Handles internal pressure, bolt clamping force, and external piping loads
Cage: Not applicable (non-bearing component)
Performance: Reliable sealing, high strength, stable under pressure and temperature variations
Construction: Typically forged or cast metal with machined sealing faces and bolt holes
Use cases: Pipe system connections, equipment mounting, flow control assemblies
Note: Ensure correct standard, gasket, and torqueing method to avoid leakage or failure
₨ 1,000.00
Type: Threaded pipe fitting (nipple)
Load: Handles internal fluid pressure; no mechanical load-bearing role
Cage: Not applicable (solid fitting, no moving parts)
Performance: Reliable sealing and connection when properly installed
Construction: Solid cylindrical piece with external threads on both ends (full or partial threading)
Use cases: Pipe extension, joining fittings, adapting system layouts, repairs
Note: Always match thread standards and use proper sealing methods to prevent leaks
₨ 1,380.00
