Type: Flexible air hose for compressed air systems
Load: Internal air pressure (PSI rating); minimal external load handling
Cage: Not applicable (no internal cage; reinforced layers instead)
Performance: Consistent airflow, flexible handling, good pressure resistance
Construction: Inner tube + reinforcement layer (braided or spiral) + outer protective cover
Use cases: Air tools, spray guns, inflators, workshop air lines, construction sites
Note: Select correct pressure rating and fittings; avoid kinks, excessive heat, and over-pressurization for safe operation
₨ 1,380.00
Type: Thrust needle roller bearing set (AXK series with 2 AS washers)
Load: Designed for high axial loads, minimal radial load capacity
Cage: Steel cage retaining precision needle rollers
Performance: Low friction axial rotation with high load capacity and compact height
Construction: Needle roller cage assembly (AXK) combined with two thrust washers (AS)
Use cases: Gearboxes, automotive assemblies, machine tools, steering systems, industrial machinery
Note: Ensure correct lubrication and proper washer alignment; not intended for significant radial loads.
₨ 123.00
Type: Thrust needle roller bearing set (AXK + 2AS series)
Load: Designed for high axial loads, not intended for radial loads
Cage: Steel cage holding needle rollers in a thrust cage assembly
Performance: Low friction rotation with high axial load capacity in compact spaces
Construction: Needle roller cage assembly combined with two hardened AS thrust washers
Use cases: Gearboxes, automotive assemblies, machine tools, pumps, and industrial machinery
Note: Requires hardened and flat running surfaces and proper lubrication for best performance and durability.
₨ 1,600.00
Type: Axial needle roller and cage thrust assembly with thrust washers (AXK plus AS)
Load: Heavy axial loads in one direction; minimal radial load capacity
Cage: Steel cage holding needle rollers
Performance: High axial stiffness and load capacity in tight space
Construction: Roller and cage thrust unit plus two thin thrust washers
Use cases: Gearbox thrust support, pump/compressor axial support, machine tool thrust points, industrial drives
Note: Requires matching raceways on shaft/housing with correct washers, and proper lubrication for long life.
₨ 1,900.00
Type: Thrust needle roller bearing set (AXK cage assembly with two AS washers)
Load: Designed to support high axial loads, not suitable for radial loads
Cage: Steel cage guiding needle rollers for even load distribution
Performance: Low friction axial movement with high load carrying capacity
Construction: Needle roller cage assembly paired with two hardened thrust washers
Use cases: Gearboxes, transmissions, machine tools, pumps, and industrial equipment
Note: Requires proper lubrication and correct axial alignment for optimal service life
₨ 230.00
Type: Thrust needle roller bearing set (AXK bearing with 2 AS washers)
Load: Designed primarily for high axial loads; not suitable for radial loads
Cage: Steel cage guiding needle rollers for uniform load distribution
Performance: Low friction axial rotation with high load capacity in a compact space
Construction: Needle roller and cage assembly (AXK) combined with two hardened AS thrust washers
Use cases: Gearboxes, automotive systems, machine tools, pumps, industrial rotating assemblies
Note: Requires hardened, flat running surfaces; ensure proper lubrication and avoid radial loading.
₨ 340.00
Type: Drawn cup needle roller bearing (BR series)
Load: Designed primarily for high radial loads with minimal axial load capability
Cage: Usually none (full complement needle rollers) or steel retainer depending on design
Performance: High load capacity for compact size, low friction rotation when lubricated
Construction: Thin drawn steel outer shell with needle rollers arranged in parallel
Use cases: Automotive gear systems, power tools, transmissions, compact machinery
Note: Shaft often acts as the inner raceway, so proper hardness, finish, and lubrication are critical for durability.
₨ 90.00
Type: Needle roller bearing
Load: Designed mainly for high radial loads with limited axial load capability
Cage: Steel cage or retainer to maintain roller spacing and alignment
Performance: High load carrying capacity, smooth rotation, efficient in compact spaces
Construction: Outer ring with precision needle rollers and cage assembly
Use cases: Gear systems, transmissions, industrial machines, automotive components
Note: Requires hardened shaft or inner ring and proper lubrication for long service life
₨ 89.00
Type: Fuel and oil resistant flexible hose
Load: Handles internal fluid pressure and external bending stress
Cage: Not applicable, no internal cage structure
Performance: Stable fluid flow, chemical resistance, good flexibility under varying conditions
Construction: Inner synthetic rubber layer, reinforcement braid or spiral, outer protective cover
Use cases: Fuel delivery systems, oil circulation lines, machinery lubrication, automotive and industrial fluid transfer
Note: Always match hose material with fluid type and pressure rating, avoid sharp bends and ensure secure connections to prevent failure
₨ 999.00
Type: Flexible hydraulic hose (reinforced, high-pressure)
Load: Handles internal fluid pressure, varying from medium to very high pressure depending on rating
Cage: Not applicable (uses reinforcement layers instead of cage structure)
Performance: Reliable fluid transfer, pressure resistance, flexible movement, stable under varying conditions
Construction: Inner tube (fluid compatible) + reinforcement layers (braided or spiral steel) + outer protective cover
Use cases: Hydraulic systems, heavy machinery, mobile equipment, industrial automation, fluid power transfer
Note: Must match pressure rating, fluid type, and temperature; avoid twisting, over-bending, and improper installation to ensure long service life
₨ 1,000.00
Type: PTFE (Teflon) tubing
Load: Designed for fluid and gas transfer under pressure; not load-bearing
Cage: Not applicable (no rolling elements)
Performance: Excellent chemical resistance, low friction, high temperature stability, non-reactive
Construction: Extruded PTFE tube with smooth inner and outer surfaces; available in various sizes and wall thicknesses
Use cases: Chemical transfer, medical tubing, food-grade fluid lines, insulation, pneumatic systems
Note: Avoid excessive bending radius; ensure correct fittings and pressure ratings for safe operation
₨ 1,000.00
Type: Flexible PVC tubing (clear or reinforced variants available)
Load: Designed for fluid and air transfer under low to medium pressure; not for structural loads
Cage: Not applicable (non-bearing product)
Performance: Smooth flow, moderate pressure handling, good chemical resistance, and flexibility
Construction: Extruded PVC material; may include braided or spiral reinforcement in higher-grade versions
Use cases: Fluid transfer, air supply lines, drainage, lab use, cable insulation, and protective covering
Note: Avoid exposure to high heat or aggressive chemicals beyond compatibility range; reinforced tubing is recommended for higher pressure applications
₨ 999.00
₨ 4,015.00
