- Type: Thrust needle roller bearing set (AXK series with 2 AS washers)
- Load: Designed for high axial loads, minimal radial load capacity
- Cage: Steel cage retaining precision needle rollers
- Performance: Low friction axial rotation with high load capacity and compact height
- Construction: Needle roller cage assembly (AXK) combined with two thrust washers (AS)
- Use cases: Gearboxes, automotive assemblies, machine tools, steering systems, industrial machinery
- Note: Ensure correct lubrication and proper washer alignment; not intended for significant radial loads.
-
Angular Contact Ball Bearings
-
Type: Angular contact ball bearing
-
Load: Combined radial + high axial (usually one direction; pairs handle both)
-
Cage: Brass / steel / polymer (depending on series and speed)
-
Performance: High stiffness, high speed capability, good precision
-
Construction: Inner & outer rings with angled raceways, precision balls, cage (often used in matched pairs)
-
Use cases: Spindles, servo motors, pumps, robotics, precision gearboxes
-
Note: Select correct contact angle and pairing/preload for your thrust direction and accuracy needs.
₨ 1,250.00Angular Contact Ball Bearings
₨ 1,250.00 -
-
₨ 11,961.00ARDUINO UNO R3 ATMEGA328P BOARD (EU Version)
₨ 11,961.00 -
-
AXK+2AS 100135
₨ 123.00AXK+2AS 100135
₨ 123.00 -
AXK+2AS 110145
- Type: Thrust needle roller bearing set (AXK + 2AS series)
- Load: Designed for high axial loads, not intended for radial loads
- Cage: Steel cage holding needle rollers in a thrust cage assembly
- Performance: Low friction rotation with high axial load capacity in compact spaces
- Construction: Needle roller cage assembly combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive assemblies, machine tools, pumps, and industrial machinery
- Note: Requires hardened and flat running surfaces and proper lubrication for best performance and durability.
₨ 1,600.00AXK+2AS 110145
₨ 1,600.00 -
AXK+2AS 130170
- Type: Axial needle roller and cage thrust assembly with thrust washers (AXK plus AS)
- Load: Heavy axial loads in one direction; minimal radial load capacity
- Cage: Steel cage holding needle rollers
- Performance: High axial stiffness and load capacity in tight space
- Construction: Roller and cage thrust unit plus two thin thrust washers
- Use cases: Gearbox thrust support, pump/compressor axial support, machine tool thrust points, industrial drives
- Note: Requires matching raceways on shaft/housing with correct washers, and proper lubrication for long life.
₨ 1,900.00AXK+2AS 130170
₨ 1,900.00 -
AXK+2AS 2035
- Type: Thrust needle roller bearing set (AXK cage assembly with two AS washers)
- Load: Designed to support high axial loads, not suitable for radial loads
- Cage: Steel cage guiding needle rollers for even load distribution
- Performance: Low friction axial movement with high load carrying capacity
- Construction: Needle roller cage assembly paired with two hardened thrust washers
- Use cases: Gearboxes, transmissions, machine tools, pumps, and industrial equipment
- Note: Requires proper lubrication and correct axial alignment for optimal service life
₨ 230.00AXK+2AS 2035
₨ 230.00 -
AXK+2AS 5578
- Type: Thrust needle roller bearing set (AXK bearing with 2 AS washers)
- Load: Designed primarily for high axial loads; not suitable for radial loads
- Cage: Steel cage guiding needle rollers for uniform load distribution
- Performance: Low friction axial rotation with high load capacity in a compact space
- Construction: Needle roller and cage assembly (AXK) combined with two hardened AS thrust washers
- Use cases: Gearboxes, automotive systems, machine tools, pumps, industrial rotating assemblies
- Note: Requires hardened, flat running surfaces; ensure proper lubrication and avoid radial loading.
₨ 340.00AXK+2AS 5578
₨ 340.00 -
BR 162416
- Type: Drawn cup needle roller bearing (BR series)
- Load: Designed primarily for high radial loads with minimal axial load capability
- Cage: Usually none (full complement needle rollers) or steel retainer depending on design
- Performance: High load capacity for compact size, low friction rotation when lubricated
- Construction: Thin drawn steel outer shell with needle rollers arranged in parallel
- Use cases: Automotive gear systems, power tools, transmissions, compact machinery
- Note: Shaft often acts as the inner raceway, so proper hardness, finish, and lubrication are critical for durability.
₨ 90.00BR 162416
₨ 90.00 -
BR 324116
- Type: Needle roller bearing
- Load: Designed mainly for high radial loads with limited axial load capability
- Cage: Steel cage or retainer to maintain roller spacing and alignment
- Performance: High load carrying capacity, smooth rotation, efficient in compact spaces
- Construction: Outer ring with precision needle rollers and cage assembly
- Use cases: Gear systems, transmissions, industrial machines, automotive components
- Note: Requires hardened shaft or inner ring and proper lubrication for long service life
₨ 89.00BR 324116
₨ 89.00 -
Deep Groove Ball Bearing
-
Type: Deep groove ball bearing
-
Load: Radial + moderate axial (both directions)
-
Cage: Steel or brass (varies by series)
-
Performance: Low friction, high speed, quiet running
-
Construction: Inner ring + outer ring + steel balls + cage (open/ZZ/2RS options)
-
Use cases: Motors, fans, pumps, conveyors, appliances, general rotating shafts
-
Note: Not ideal for very heavy axial loads, severe shock loads, or significant misalignment (use tapered/spherical if needed).
₨ 350.00Deep Groove Ball Bearing
₨ 350.00 -
-
₨ 17,685.00DISCOVERY STM32F723 EVAL BRD (EU Version)
₨ 17,685.00 -
₨ 42,318.00DISCOVERY STM32H747XI EVAL BRD (EU Version)
₨ 42,318.00 -
-
Needle Roller Bearing
Type: Roller thrust bearing
Load: Very high axial/thrust load; minimal radial load capacityCage: Typically steel or brass (depending on series)
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
Construction: Thrust washers + rollers + cage (often separable)
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings₨ 550.00Needle Roller Bearing
₨ 550.00 -
Pillow Block
-
Type: Pillow block bearing unit (housed bearing)
-
Load: Primarily radial; handles light-to-moderate axial depending on insert type
-
Cage: Depends on bearing insert (steel/brass/polymer)
-
Performance: Quick installation, stable support, tolerates minor misalignment (in many designs)
-
Construction: Cast housing + bearing insert + seals + locking method (set-screw/collar/sleeve), often grease fitting
-
Use cases: Conveyors, fans, agricultural machinery, rollers, general industrial shafts
-
Note: Select the correct locking type and seal/lube for your environment; use proper alignment and mounting rigidity for long bearing life.
₨ 335.00Pillow Block
₨ 335.00 -
-
Roller Thrust Bearing
-
Type: Roller thrust bearing
-
Load: Very high axial/thrust load; minimal radial load capacity
-
Cage: Typically steel or brass (depending on series)
-
Performance: High stiffness, excellent heavy-load handling; best for low–moderate speeds
-
Construction: Thrust washers + rollers + cage (often separable)
-
Use cases: Screw jacks, presses, extruders, rotary tables, cranes/hoists, heavy gearboxes
-
Note: Needs good alignment and rigid mounting surfaces; not a replacement for radial bearings.
₨ 675.00Roller Thrust Bearing
₨ 675.00 -
