-
- Type: Gear pump (external or internal gear type)
- Load: Handles hydraulic pressure loads; designed for steady fluid displacement
- Cage: No cage; uses meshing gears supported by bearings/bushings
- Performance: Steady flow, moderate pressure capability, efficient with viscous fluids
- Construction: Housing + driving and driven gears + shafts + seals; close-clearance design
- Use cases: Hydraulics, lubrication, fuel transfer, oil circulation, industrial fluid systems
- Note: Requires clean fluid and proper lubrication; avoid dry running to prevent damage
₨ 12,000.00
-
- Type: Air-Operated Double Diaphragm (AODD) pump
- Load: Handles fluid pressure loads; suitable for low to medium pressure transfer applications
- Cage: Not applicable (uses flexible diaphragms instead of rolling elements)
- Performance: Steady flow, self-priming, can run dry, handles solids and viscous fluids well
- Construction: Dual diaphragm chambers, air valve system, check valves, and fluid housings (metal or plastic options)
- Use cases: Chemical handling, slurry transfer, oil and fuel movement, wastewater, coatings, and industrial processing
- Note: Requires clean, regulated compressed air; efficiency depends on air supply quality and proper diaphragm material selection
₨ 25,000.00
-
- Type: Reciprocating piston pump (positive displacement)
- Load: Handles high-pressure loads with steady flow output
- Cage: Not typically cage-based; uses piston, seals, and valve assemblies
- Performance: High efficiency, accurate flow control, capable of very high pressures
- Construction: Cylinder block, reciprocating piston, inlet/outlet valves, seals, and drive mechanism
- Use cases: Hydraulic power units, chemical injection, pressure cleaning, oil transfer, industrial fluid systems
- Note: Requires regular seal maintenance and clean fluid supply; not ideal for highly abrasive or contaminated fluids without proper filtration
₨ 34,000.00
-
- Type: Submersible pump (water/sewage/deep well types)
- Load: Handles hydraulic load based on fluid head and flow demand
- Cage: Not applicable (sealed motor and impeller assembly)
- Performance: High efficiency, consistent flow, self-priming due to submerged operation
- Construction: Sealed motor housing, impeller, shaft, mechanical seals, and waterproof cable
- Use cases: Borewells, drainage pits, sewage systems, irrigation, construction sites
- Note: Must remain submerged during operation for cooling; running dry can damage the pump
₨ 35,000.00
