-
Type: Pillow block bearing (WERB series)
-
Load: Radial and limited axial loads
-
Cage: Sealed bearing, usually with polymer or metal retainer
-
Performance: Reliable rotation, moderate speed, low maintenance
-
Construction: Cast housing + rolling bearing + integrated seals
-
Use cases: Conveyors, fans, pumps, agricultural machinery, general industrial shafts
-
Note: Pre-lubricated and sealed; verify shaft alignment and load limits for optimal life
-
SH 25
₨ 234.00SH 25
₨ 234.00 -
SH 16
- Type: Mounted pillow block bearing (SH series)
- Load: Primarily radial, some axial load capacity
- Cage: Steel or polymer retainer depending on model
- Performance: Stable rotation, low vibration, long service life with proper lubrication
- Construction: Cast iron housing with mounted ball bearing
- Use cases: Conveyors, fans, agricultural machines, general industrial equipment
- Note: Verify shaft size, alignment, and lubrication needs; avoid overloading or harsh conditions without proper sealing
₨ 300.00SH 16
₨ 300.00 -
SFU 2005-3
- Type: Precision ball screw assembly (SFU 2005 series, triple nut configuration)
- Load: Designed to support axial loads during linear motion; limited tolerance to radial or side loads
- Cage: Internal ball recirculation system with steel balls and retainer channels
- Performance: High efficiency motion transfer, smooth travel, good repeatability for positioning systems
- Construction: Hardened steel threaded screw shaft with recirculating ball nut assembly
- Use cases: CNC axes, automation stages, robotic motion systems, linear actuators, precision positioning equipment
- Note: Requires correct alignment, end support bearings, and regular lubrication for long service life and accurate operation.
₨ 456.00SFU 2005-3
₨ 456.00 -
Coupling D65-90-20-35
-
Type: Flexible shaft coupling (D65-90-20-35 series)
-
Load: Transmits torque between shafts; handles moderate misalignment and shock loads
-
Cage: Not applicable; uses flexible elements or elastomeric insert depending on design
-
Performance: Smooth torque transmission with vibration damping; reduces stress on connected components
-
Construction: Two hubs connected by flexible element; may include elastomer or metallic flex segments
-
Use cases: Motors, pumps, conveyors, gearboxes, CNC machinery, light automation
-
Note: Ensure shaft diameters and torque ratings match; stay within specified misalignment limits
₨ 567.00Coupling D65-90-20-35
₨ 567.00 -
-
EGR 15
- Type: Linear guide block (EGR 15 WERB series)
- Load: Supports radial and moderate moment loads during guided linear travel
- Cage: Internal retainer guiding recirculating rolling elements (steel or polymer depending on model)
- Performance: Smooth motion, low friction, accurate positioning when aligned correctly
- Construction: Precision machined block body with recirculating ball path designed to run on EGR 15 linear rail
- Use cases: CNC machines, 3D printers, automation equipment, gantries, robotics slides
- Note: Must be used with matching EGR 15 rail, proper alignment and lubrication required for best performance.
₨ 780.00EGR 15
₨ 780.00 -
DSG 16H
- Type: Linear guide block (DSG 16H WERB series)
- Load: Supports radial loads, reverse radial loads, and moderate moment loads during linear motion
- Cage: Rolling element retainer with recirculating ball path design
- Performance: Smooth motion, high positioning accuracy, and low friction for precision movement
- Construction: Guide block body with recirculating ball bearings designed to run on a matched linear rail
- Use cases: CNC machine axes, automation equipment, gantry systems, robotics, precision motion platforms
- Note: Works with a compatible linear guide rail; correct mounting, alignment, and lubrication are required for reliable operation.
₨ 999.00DSG 16H
₨ 999.00 -
SBR20 4000
- Type: Supported round linear rail (SBR series)
- Load: Supports radial loads and moderate moment loads through supported base
- Cage: Used with recirculating ball bearing blocks (SBR20UU type)
- Performance: Smooth motion, improved rigidity over unsupported shafts, reliable long travel guidance
- Construction: Hardened 20 mm steel shaft mounted on precision machined aluminum support rail
- Use cases: CNC routers, gantry machines, automation lines, laser machines, industrial sliding systems
- Note: Requires proper alignment and compatible SBR20 bearing blocks for best motion accuracy and durability
₨ 1,380.00SBR20 4000
₨ 1,380.00 -
FK-FF 30
Short Description Points
-
Type: Linear guide (FK-FF 30 series)
-
Load: High radial, axial, and moment load capacity
-
Cage: Steel ball recirculation with precision retainer
-
Performance: Smooth motion, high rigidity, excellent repeatability
-
Construction: Hardened rail + recirculating ball block assembly
-
Use cases: CNC axes, robotics, automation lines, gantries, precision equipment
-
Note: Requires precise mounting, alignment, and lubrication for maximum lifespan and performance
₨ 1,380.00FK-FF 30
₨ 1,380.00 -
-
SH 12
- Type: Shaft support block (SH 12 bridged nylon)
- Load: Designed for light to moderate radial loads from supported shafts
- Cage: No internal cage; acts as a shaft holder rather than a rolling bearing
- Performance: Provides stable shaft positioning, vibration damping, and lightweight support
- Construction: Molded nylon body with bridged top design and mounting holes for frame attachment
- Use cases: CNC and 3D printer frames, automation rails, robotics guides, DIY linear motion setups
- Note: Best suited for lighter systems; ensure correct shaft alignment and secure mounting for smooth motion.
₨ 1,454.00SH 12
₨ 1,454.00 -
SH 35
Short Description Points
-
Type: Pillow block bearing (SH series)
-
Load: Supports radial and moderate axial loads
-
Cage: Typically pressed steel or polymer retainer within bearing insert
-
Performance: Smooth rotation, stable support, low maintenance
-
Construction: Mounted housing with insert bearing; sealed or relubricatable
-
Use cases: Industrial machinery, conveyors, fans, pumps, agricultural equipment
-
Note: Ensure proper shaft fit, mounting alignment, and lubrication; choose correct insert for load/speed requirements
₨ 4,567.00SH 35
₨ 4,567.00 -
-
SBR 10-4000
- Type: Supported linear rail (SBR series)
- Load: Handles radial loads from sliding blocks and moderate moment loads due to supported base
- Cage: Used with recirculating ball bearing blocks (SBR10UU type)
- Performance: Smooth linear travel, improved rigidity compared to unsupported shafts, good stability over long spans
- Construction: Hardened 10 mm steel shaft mounted on an aluminum support base with mounting holes
- Use cases: CNC machines, long travel automation axes, gantries, robotics slides, inspection systems
- Note: Must be used with compatible SBR10UU blocks; proper alignment and mounting surface flatness are important for accuracy and durability.
₨ 9,000.00SBR 10-4000
₨ 9,000.00 -
HGR 20-4000
- Type: Linear guide rail (HGR series)
- Load: Supports high radial and moment loads when paired with matching bearing blocks
- Cage: Recirculating ball system with internal retainers inside the block
- Performance: High rigidity, smooth motion, low friction, precise linear guidance
- Construction: Hardened steel rail with precision ground raceways used with HGR20 bearing blocks
- Use cases: CNC machines, automation gantries, robotics systems, laser machines, large motion platforms
- Note: Requires precise mounting surface, correct block compatibility, and regular lubrication for best performance.
₨ 10,000.00HGR 20-4000
₨ 10,000.00 -
HGR 45
- Type: Linear guide rail (HGR series)
- Load: Supports high radial and lateral loads through matching carriage block
- Cage: Rolling element retainer inside the carriage block (steel or polymer depending on block model)
- Performance: High rigidity, precise linear guidance, smooth motion under heavy loads
- Construction: Precision hardened steel rail with ground raceways used with recirculating ball carriage block
- Use cases: CNC machines, gantry systems, industrial automation equipment, robotics, precision machine tools
- Note: Requires compatible HGR45 carriage block, proper mounting alignment, and regular lubrication for optimal life and accuracy.
₨ 10,000.00HGR 45
₨ 10,000.00 -
SBR 25-4000
- Type: Supported linear rail (SBR series)
- Load: Designed to handle radial loads and moderate moment loads when used with matching bearing blocks
- Cage: Bearing blocks typically use polymer or steel retainers for ball circulation
- Performance: Smooth linear motion, high rigidity compared to unsupported shafts, good load stability over long distances
- Construction: Hardened steel shaft mounted on precision aluminum support base; used with SBR25UU recirculating ball blocks
- Use cases: CNC router axes, gantry motion systems, automation equipment, sliding platforms, industrial DIY machines
- Note: Proper alignment and secure mounting along the full rail length are important to prevent binding and ensure smooth travel.
₨ 10,000.00SBR 25-4000
₨ 10,000.00 -
HGR 25-3000
- Type: Linear guide rail (HGR series)
- Load: Designed to support radial, reverse radial, and moderate moment loads when paired with matching blocks
- Cage: Recirculating ball system inside the bearing block (rail itself has no cage)
- Performance: High precision linear motion with low friction and strong rigidity over long travel lengths
- Construction: Precision ground hardened steel rail with mounting holes for rigid frame installation
- Use cases: CNC machines, automation gantries, robotics tracks, material handling systems, precision sliding platforms
- Note: Must be used with compatible HGR 25 bearing blocks and mounted on a flat, aligned surface for best accuracy and lifespan.
₨ 10,500.00HGR 25-3000
₨ 10,500.00 -
SBR 35-4000
- Type: Supported linear rail (SBR series)
- Load: High radial load capacity with improved support for long span travel
- Cage: Used with SBR35UU recirculating ball bearing blocks with internal retainers
- Performance: Smooth linear motion, stable guidance, good rigidity over long distances
- Construction: Hardened steel shaft mounted on precision aluminum support base
- Use cases: CNC router axes, plasma machines, automation gantries, linear tables, robotics slides
- Note: Must be mounted evenly across the base to maintain alignment and prevent rail deflection over long spans.
₨ 10,500.00SBR 35-4000
₨ 10,500.00 -
FK-FF 17
Short Description Points
-
Type: Linear guide (FK-FF 17 series)
-
Load: Supports radial, axial, and moderate moment loads
-
Cage: Recirculating ball elements in hardened steel; polymer retainers in some models
-
Performance: High rigidity, smooth low-friction motion, excellent repeatability
-
Construction: Hardened rail + recirculating block with ball bearings; precision ground surfaces
-
Use cases: CNC axes, 3D printers, automation slides, gantries, robotics, inspection setups
-
Note: Requires proper alignment, mounting, and lubrication; overloading reduces lifespan
₨ 12,345.00FK-FF 17
₨ 12,345.00 -
-
SH 20
- Type: Shaft support block (SH series)
- Load: Supports radial loads from the mounted shaft and attached moving components
- Cage: Not applicable (solid support block, no rolling elements)
- Performance: Provides stable shaft mounting and helps maintain accurate linear motion alignment
- Construction: Metal support block with precision bore for 20 mm shaft and mounting holes for frame attachment
- Use cases: CNC machines, 3D printer frames, automation systems, sliding mechanisms, linear guide assemblies
- Note: Proper alignment and spacing of supports improves system rigidity and reduces shaft bending during operation.
₨ 12,345.00SH 20
₨ 12,345.00 -
1BA Linear Guide
Short Description Points
-
Type: Linear guide (1BA, round shaft)
-
Load: Primarily radial loads; limited axial and moment capacity
-
Cage: Polymer or metal retainer depending on model
-
Performance: Smooth, low-friction motion with good repeatability
-
Construction: Bearing housing with rolling elements + retainer; rides on hardened round shaft
-
Use cases: CNC axes, 3D printers, automation slides, gantries, robotics, inspection jigs
-
Note: Requires proper shaft hardness, alignment, and lubrication; avoid heavy side moments or unsupported heavy loads
₨ 15,000.001BA Linear Guide
₨ 15,000.00 -
-
FK-FF 10
Short Description Points
-
Type: Linear guide (FK-FF series)
-
Load: Supports radial, axial, and moderate moment loads
-
Cage: Typically steel or polymer ball/roller retainer
-
Performance: High precision, low friction, smooth motion under load
-
Construction: Rail + carriage/block with recirculating balls/rollers
-
Use cases: CNC/3D printer axes, automation slides, gantries, robotics, inspection setups
-
Note: Requires proper rail alignment, lubrication, and installation; avoid overload beyond rated capacity
₨ 123,456.00FK-FF 10
₨ 123,456.00 -